Appendix E System 5000, Am2020/Afp-1010; Mounting An Aps-6R In A System 5000, Am2020 Or Afp-1010; Connecting The Aps-6R To An Mps-24A; Connecting The Aps-6R To An Mps-24Brb - Notifier APS-6R Instruction Manual

APPENDIX E - System 5000, AM2020/AFP-1010
APPENDIX E - System 5000,
AM2020/AFP-1010
Mounting an APS-6R in a System 5000, AM2020 or
AFP-1010
An Auxiliary Power Supply is mounted on a CHS-4 Series chassis.
See "Mounting in CAB-3/CAB-4 Series Cabinets" on page 12.

Connecting the APS-6R to an MPS-24A

Make the following connections as shown in the figure below.
J1
J9
J2
TB2
J3
JP2 JP3

Connecting the APS-6R to an MPS-24BRB

The connections are the same as for the System 500. Refer to Page 25
in "System 500" for wiring instructions.
26
www.PDF-Zoo.com
• Connect primary power from TB1 on the APS-6R to MPS-24A
terminal block TB1, Pin 5(
• Connect secondary power from TB3 on the APS-6R to MPS-
24A terminal block TB2, Pin 1(+) and Pin 2(–).
• Connect trouble input from J3 on the APS-6R to MPS-24A
terminal block P5.
-
+
To battery backup
Figure 17 Wiring to MPS-24A
firealarmresources.com
) and Pin 7(
NEUT
B AT + BAT -
TB2
TB1
E ARTH G ND AC NEUTRA L A C HOT
CB1 F1
).
HOT
P OW ER LIMI TED
+24 R CO MM ON +2 4 COM MON
P2
P5
P4
P3
R27
JP5
PN 50702:B2 4/14/03