Connecting the APS-6R to an AFP-200 Power Supply
J9
J2
TB2
JP2
JP3
PN 50702:B2 4/14/03
www.PDF-Zoo.com
Make the following connections as shown in the figure below.
• Connect primary power from TB1 on the APS-6R to terminal
block TB7 (
NEUT
• Connect secondary power from TB3 on the APS-6R to terminal
block J3 (+ and –) on the AFP-200.
• Connect trouble input from J3 on the APS-6R to terminal block
J11 on the AFP-200.
J1
J3
-
+
To battery backup
Figure 12 Wiring to AFP-200 Power Supply
firealarmresources.com
APPENDIX A - AFP-200
and
) on the AFP-200.
HOT
21