Sage Dual Boiler BES920 Instruction Booklet page 11

OPERATING YOUR NEW APPLIANCE
START UP
Press the POWER button to switch the
machine ON. The POWER button will flash
and the LCD screen will display the current
espresso boiler temperature.
When the machine has reached operating
temperature, the POWER button light will
stop flashing and the MANUAL, 1 CUP and
2 CUP buttons will illuminate.
The machine is now in STANDBY mode
ready for use.
NOTE
You will not be able to select 1 CUP,
2 CUP or CLEANING CYCLE during
START UP.
AUTO OFF
The machine will turn off completely if not
used for a continuous 20 minutes period.
LCD INTERFACE
Display modes
3 modes can be displayed on the LCD
screen: Shot Temp, Shot Clock or Clock.
Press UP or DOWN arrow to change the
display mode between shot clock & clock.
Shot temp will be displayed during an
extraction.
1. Shot Temp
Displays selected extraction temperature
(default set at 93°C), but can be changed
from 86°C - 96°C. See 'Extraction
Temperature', page 15.
2. Shot Clock
Temporarily displays duration of last
espresso extraction in seconds.
3. Clock
Temporarily displays current time (default
set at 12.00am if time has not been set).
11