Establishing A Connection Via Wlan In The Local Network - SMA SUNNY TRIPOWER 5.0 SMART ENERGY Operating Manual

9 Operation
☐ A smart device (e.g. smartphone, tablet or laptop) must be available.
☐ The smart device must be in the same local network as the product.
☐ The respective latest version of one of the following web browsers must be installed on the
smart device: Chrome, Edge, Firefox or Safari.
Procedure:
1. Open the web browser of your smart device. Enter the IP address of the product in the address
bar of the web browser.
Web browser signals a security vulnerability
2.
After the IP address has been entered, a message might appear indicating that the
connection to the user interface of the product is not secure. SMA Solar Technology AG
guarantees the security of the user interface.
• Continue loading the user interface.
☑ The login page of the user interface opens.
9.1.4

Establishing a Connection via WLAN in the Local Network

New IP address for connecting with a local network
If the product is connected to a local network (e.g. via a router), the product will receive a new
IP address. Depending on the type of configuration, the new IP address will be assigned
automatically by the DHCP server (router) or manually by you. Upon completion of the
configuration, the product can only be reached via the following access addresses:
• Generally applicable access address: IP address manually assigned or assigned by the
DHCP server (router) (identification via network scanner software or network
configuration of the router).
• Access address for Apple and Linux systems: SMA[serial number].local (e.g.
SMA0123456789.local)
• Access address for Windows and Android systems: https://SMA[serial number] (e.g.
https://SMA0123456789)
Requirements:
☐ The product must be commissioned.
☐ The product must be integrated into the local network. Tip: There are various methods of
integrating the product into the local network with the aid of the installation assistant.
☐ A smart device (e.g. smartphone, tablet or laptop) must be available.
☐ The smart device must be in the same local network as the product.
☐ The respective latest version of one of the following web browsers must be installed on the
smart device: Chrome, Edge, Firefox or Safari.
Procedure:
• Enter the IP address of the product in the address bar of the web browser.
☑ The login page of the user interface opens.
68 STPx0-3SE-40-BE-en-10
SMA Solar Technology AG
Operating Manual