Olympus EVIS EXERA TJF-160VR Instructions Manual page 33

Attaching the air/water valve
1.
Attach the air/water valve to the air/water cylinder of the endoscope (see
Figure 3.13).
2.
Confirm that the valve fits properly without any bulging of the skirt.
Air/water valve
Figure 3.13
EVIS EXERA TJF TYPE 160VR OPERATION MANUAL
Suction valve
Skirt
Suction cylinder
Air/water cylinder
The air/water valve may stick at first, but it should operate
smoothly after it is depressed a few times.
Chapter 3 Preparation and Inspection
29