Olympus EVIS EXERA TJF-160VR Instructions Manual page 17

11. Insertion tube limit mark
This mark shows the maximum point to which the endoscope may be
inserted into the patient's body.
12. Forceps elevator
The elevator moves endo-therapy accessories when the elevator control
lever is operated. In addition, the forceps elevator is used for assistance of
the fixation function of the guidewire while inserting/withdrawing the wire
guided type endo-therapy accessory.
13. Bending section
This section moves the distal end of the endoscope when the UP/DOWN
and RIGHT/LEFT angulation control knobs are operated.
14. Remote switches 1 to 4
The functions of remote switches 1 to 4 can be selected on the video system
center. When selecting the functions, also refer to the instruction manual for
the video system center.
15. Elevator channel plug
This plug is used for connection of the washing tube to clean and disinfect
the elevator channel.
16. Color code (orange)
This code is used to quickly determine the compatibility of endo-therapy
accessories. The endoscope can be used with endo-therapy accessories
that have the same color code.
17. RIGHT/LEFT angulation lock
Turning this lock in the "F
the opposite direction locks the bending section at any desired position.
18. RIGHT/LEFT angulation control knob
When this knob is turned in the "R
RIGHT; when the knob is turned in the "
moves LEFT.
19. Elevator control lever
When this lever is moved in the "
raised. When the lever is turned in the opposite direction, the forceps
elevator is lowered.
EVIS EXERA TJF TYPE 160VR OPERATION MANUAL
Chapter 2 Instrument Nomenclature and Specifications
" direction frees angulation. Turning the lock in
" direction, the bending section moves
L" direction, the bending section
U" direction, the forceps elevator is
13