Ballard Designs Eastman MO196 Quick Start Manual

PRODUCT NAME: Eastman Secretary

ITEM NUMBER: MO196

ASSEMBLED DIMENSIONS : 52"H x 32"W x 17 1/4"D

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

UPDATED: 1/12/2021

Prevent accidentally discarding small parts or

hardware. Retain all carton contents until assembly

and installation are complete.

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

IMPORTED

Page 1 of 4

Table of Contents

Need help?

Do you have a question about the Eastman MO196 and is the answer not in the manual?

Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Eastman Secretary ITEM NUMBER: MO196 ASSEMBLED DIMENSIONS : 52”H x 32”W x 17 1/4”D Prevent accidentally discarding small parts or hardware. Retain all carton contents until assembly and installation are complete. PRODUCTS ARE NOT INTENDED IMPORTED FOR COMMERCIAL USE.
Page 2 Assemble in location for intended use. REQUIRED TOOLS: Ltr. Qty. Hardware Included Phillips Screwdriver -Two person assembly suggested. File Rods Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, Wall Anchoring level, padded surface. (Anti-Tip) Kits See Page 4 WARNING...
Page 3 Assemble in location for intended use. STEP 1: Open Lower Drawer and place File Rods (A) into notches along inside upper edge. NOTE: Drawer does not need to be completely removed to install Rods. NOTE: Drawer does not need to be completely removed to install rods. LEVELERS: Secretary is equipped with Rotary Levelers under each corner.
Page 4 WALL ANCHORING HARDWARE (ANTI-TIP) Ltr. Qty. Hardware Included Large Screw WARNING Small Screw Tip-Over Hazard ANCHORING HARDWARE INCLUDED Bracket Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. Retention Belt Installation: 1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit. 2.