Oil Top - KAESER SK 19 Service Manual

 Venting the compressor package (see chapter 9.10).
1 Oil drain plug (oil cooler)
Drain the oil from the oil cooler:
 Prepare an oil container to catch the escaping oil.
 Slowly unscrew the oil drain plug (1). The oil drains under the force of gravity.
 Screw the oil drain plug (1) back in tightly.
9.14.2 Oil top -- off
 Unscrew the oil filler plug (4) on the oil separator tank.
Attention!
 Top off the oil to the maximum mark.
See chapter 1.7 for the quantity of oil.
 Check the gasket ring of the filler plug (4) for damage and then screw in the filler plug.
Before opening or removing pressurized components (pipes, hoses,
tanks, etc.) it is imperative that the compressor package is completely
depressurized.
Dispose of the old oil according to environmental regulations.
Always use the same brand and type of oil when topping off the oil.
(see label on the oil separator tank).
During an oil change, drain the old oil completely and always replace
the oil filter.
Never mix different oil types or brands.
Oil recommendations see chapter 1.8
1
Maintenance
9 --- 53