KAESER SK 19 Service Manual page 33

1 Door interlock switch
2 Clamping nut
3 Insertion key
Functional check of the interlock switch
A functional check of the door interlock switch must be made after in-
Attention!
itial start.
 Start the compressor package (see chapter 8.3).
 Open the left ---hand maintenance door --- the compressor package will shut down im-
mediately if the door interlock switch functions correctly.
 Close the left ---hand maintenance door.
 Reset the alarm message by pressing the acknowledge (reset) key (11, see
chapter 8.2.2) on SIGMA CONTROL.
The compressor package is now ready to start again.
4 Bolt
5 Frame
6 Maintenance door
Initial Start
6
2
2
3
4
4
5
1
7 --- 29