Remote Control; Firmware Updates; Care/Cleaning - Leica GEOVID PRO Instruction Manual

Hide thumbs Also See for GEOVID PRO:
Table of Contents

Advertisement

REMOTE CONTROL

All functions and settings of the device can be done via a mobile
device.
Establishing a connection
Operate the desired functions via the app

FIRMWARE UPDATES

Leica is continuously working on the further improvement and opti-
mization of their products. Some of these improvements and expan-
sions of the functional scope can be installed at a later time. Leica
releases so-called firmware updates at irregular intervals for that
purpose. These updates are handled via the Leica Ballistics app.
The information contained in this manual references the most cur-
rent firmware version at the time of market launch.
Establishing a connection
Follow in-app instructions
Caution
• Do not switch off the device during the update process!

CARE/CLEANING

• Your Leica rangefinder requires no special care.
• Coarse dirt particles like sand can be removed with a soft brush
or simply blown off.
• Do not use excessive force when cleaning a severely soiled lens
surface. The coating is abrasion resistant, but not impervious to
sand or salt crystals.
• Always rinse off any traces of salt water! Dried salt crystals could
damage the surfaces.
• Fingerprints, etc. on front lenses and eyepiece lenses can be pre-
cleaned with a damp cloth and then wiped dry with a clean leather
or lint-free cloth.
• The rangefinder should be stored in a well-ventilated, dry and cool
place to prevent fungal growth (particularly important in humid
climates).
• Do not use alcohol or chemical cleaning solutions on the optics
or housing.
27
CARE/CLEANING

Advertisement

Table of Contents
loading

Table of Contents