Basic Information On Menu Control; Setting Of The Desired Unit Of Measure - Leica GEOVID 402 Instruction Manual

BASIC INFORMATION ON MENU CONTROL

The main menu consists of the menu items meters/
yards display ( ) and the display of the equivalent
USEU
horizontal range ( ). Further details on the
EHr
functions can be found in the relevant sections.
Both the main menu and the respective setting
options form an endless loop, i.e. all points/settings
can be called up by repeatedly pressing the button.

SETTING OF THE DESIRED UNIT OF MEASURE

The Leica Geovid HD-R can be set to the Imperial
system of units commonly used in the USA (
the metric system ( ), i.e. for range/temperature/
EU
atmospheric pressure either yards and inches/
Fahrenheit/inHG (inches of mercury) or meters and
centimeters/Celsius/millibar.
The Leica Geovid HD-R is set at the factory to yards
( ).
US
Setting of the system of units
1. Hold the auxiliary/menu button depressed (≥4s).
•
US.EU
2. Press the main/trigger button to select the
desired unit of measure.
= Display in yards
US
= Display in meters
EU
Note:
The active setting is always shown in the display: If
metric values are selected, a dot appears in the
bottom right-hand corner next to the target mark.
) or to
US
3. Save your setting by briefly pressing the
auxiliary/menu button.
30
appears (flashing).
US EU