Setting The Operating Mode; Setting The Display Brightness - Leica GEOVID PRO Instruction Manual

SETTING THE UNIT OF MEASURE
The device can be set to imperial units of measure (
units of measure ( ), i.e. yards & inches/Fahrenheit/InHG (inches
eu
of mercury) for Distance/Temperature/Air Pressure, or meter &
centimeter/Celsius/millibar.
▸ Press and hold the menu selection button
• appears.
eu.us
▸ Press the main switch several times briefly until the desired set-
ting appears
Display in meters
eu
Display in yards
us
Note
• The current setting is always visible in the display: In addition to
the numbers, you will see
M
) or metric
us
(for meters) or (for yards).
y

SETTING THE OPERATING MODE

The device can be used in various operating modes. See p. 22 for
more information.
▸ Press and hold the menu selection button
▸ Press the menu selection button 1x briefly
• appears.
mOd e
▸ Press the main switch several times briefly until the desired set-
ting appears
Equivalent horizontal distance
ehr
Actual distance
lOs
Ballistic curve
ba ll

SETTING THE DISPLAY BRIGHTNESS

The display brightness can be set manually to various levels.
▸ Press and hold the menu selection button
▸ Press the menu selection button 3x briefly
• appears.
brtn
▸ Press the main switch several times briefly until the desired setting
appears
– - = fixed brightness values
br1 br5
SETTINGS AND OPERATION
17