Using User-Defined Ballistics Curves; Wind Correction - Leica GEOVID PRO Instruction Manual

USING USER-DEFINED BALLISTICS CURVES

A ballistic profile from the Leica Ballistics app must be created and
activated on the device to determine ballistic correction values.
IN THE BINOCULARS
▸ Press and hold the menu selection button
▸ Press the menu selection button 2x briefly
• appears.
bt
▸ Press the main switch 2x briefly
• appears.
On
• Bluetooth is activated and a connection is established (
®
appears).
ON THE MOBILE DEVICE
▸ Activate Bluetooth
®
▸ Installation and startup of the "Leica Ballistics" app
▸ Select the relevant device
▸ Create a ballistics profile under "Ballistic Profile"
▸ Activate a suitable ballistics profile
• The profile will be automatically synched with the Leica device
after activation.

WIND CORRECTION

Wind speed and direction can be entered on the device manual to
display lateral correction values.
WIND SPEED
Wind speed settings between 0 and 40 are available. The value is
entered in accordance with the current settings in km/h (
( ).
us
▸ Press the menu selection button briefly
• appears.
spd
▸ Press the main switch several times briefly until the desired setting
appears
or
▸ Press and hold the main switch
• The device will quickly cycle through the available settings.
) or mph
eu
23
BALLISTICS