Connecting To External Metering Devices - Leica GEOVID PRO Instruction Manual

WIND DIRECTION
▸ Press the menu selection button briefly
• appears.
spd
▸ Press the menu selection button again briefly
• appears.
d lr
▸ Press the main switch several times briefly until the desired setting
appears
– – : the wind direction value is set in accordance with the
1 12
clock face
Example: wind comes from 6 o'clock.
Note
• Lateral correction values are not displayed if wind speed is set to
.
0
24
BALLISTICS

CONNECTING TO EXTERNAL METERING DEVICES

External devices from manufacturers like Nielsen-Kellermann (Kes-
trel models) or Garmin (Foretrex
® ®
ing ballistic correction values. These devices receive data like the
measured distance, angle and target direction. The devices include
the data in the calculation of ballistic values, and return the relevant
correction values.
▸ External device configuration
▸ Press and hold the menu selection button
▸ Press the menu selection button 2x briefly
• appears.
bt
▸ Press the main switch 2x briefly
• appears.
On
• Bluetooth is activated and a connection is establ i shed (
®
appears).
Notes
• The device can only be connected to one smartphone or other
external device at a time. An existing connection must therefore
be actively disconnected (deactivate Bluetooth
• Take note of the range capabil i ties of the external devices used.
• Read the manual of the relevant external device for operating
instructions.
GPS) are compatible for provid-
®
).
®