METERING OPERATION
DISTANCE MEASUREMENT MADE EASY
▸
Press the main switch briefly
▸
Aim the target mark at the object
▸
Press the main switch again
• The target mark disappears briefly and the measured value is
displayed.
• You can do another measurement at any time by pressing the
main button while the target mark remains lit.
will appear in the following scenarios:
- - -
– Distance to the object is less than 10 meters
– Range capability is exceeded
– Object is not sufficiently reflective
SCAN MODE (OBJECT TRACKING)
9 8
▸
Press the main switch briefly
▸
Aim at the object while target mark is lit
▸
Press and hold main switch for approx. 2.5 seconds
• The device switches to scan mode and will then measure con-
tinuously. Scan mode is indicated by a change in the display. A
new measured value appears after approx. 0.5 seconds.
6 1
7 2
METERING OPERATION
6 3
19