Table of Contents
Advertisement
BALLISTICS
The device can be used in various operating modes.
EQUIVALENT HORIZONTAL RANGE (
Shots at higher or lower elevation targets are subject to changed
ballistic conditions. They require knowledge of the equivalent hori-
zontal range, which is relevant for hunting. Knowledge of the equiv-
alent horizontal range is important, for example when using ballistic
reticles.
values are indicated by the additional
ehr
▸
Press and hold the menu selection button
▸
Press the menu selection button 1x briefly
•
appears.
mOd e
▸
Press the main switch several times briefly until
Note
• This mode is preset ex works.
ACTUAL DISTANCE (
)
lOs
Only the actually measured, linear distance will be displayed (individual
measurement or scan mode).
▸
Press and hold the menu selection button
▸
Press the menu selection button 1x briefly
•
appears.
mOd e
▸
Press the main switch several times briefly until
22
BALLISTICS
BALLISTIC CURVE (
The device comes equipped with a ballistic calculator, and can display
correction values in addition to the measured distance.
If a ballistic profile is activated, after each distance measurement the
linear, direct distance to the target is displayed twice in succession,
)
ehr
first for 1 s, and then for 2 s each the calculated correction values for
elevation and lateral.
▸
Press and hold the menu selection button
▸
Press the menu selection button 1x briefly
•
display.
ehr
▸
Press the main switch several times briefly until
Warning
• A general ballistics profile (based on .308" 175 g Sierra Match-
King) is used by default ex works, which may not match the actual
appears
ehr
munition used.
• The profile most recently synched from the Leica Ballistics app
to the device will be used for all subsequent accesses of the
function, until a new one is set. That also applies if there is no
connection to the app. Make sure to always only use the profile
matching the actual munition to be used.
appears
lOs
)
ba ll
appears.
mOd e
appears
ba ll
ba ll
Advertisement
Table of Contents
