Battery Safety; Protection Against Pressurized Systems - Bosch Rexroth MAD Project Planning Manual

Asynchronous housing motors
Hide thumbs Also See for Rexroth MAD:
Table of Contents

Advertisement

14/265
Safety notes for electric drives and controls
3.3.7

Battery safety

3.3.8

Protection against pressurized systems

Bosch Rexroth AG R911295781_Edition 11
Do not stand under hanging loads.
Immediately clean up any spilled liquids from the floor due to the risk of
falling!
Batteries consist of active chemicals in a solid housing. Therefore, improper
handling can cause injury or property damage.
Risk of injury by improper handling!
Do not attempt to reactivate low batteries by heating or other methods
(risk of explosion and cauterization).
Do not attempt to recharge the batteries as this may cause leakage or
explosion.
Do not throw batteries into open flames.
Do not dismantle batteries.
When replacing the battery/batteries, do not damage the electrical parts
installed in the devices.
Only use the battery types specified for the product.
Environmental protection and disposal! The batteries contained in
the product are considered dangerous goods during land, air, and
sea transport (risk of explosion) in the sense of the legal regula‐
tions. Dispose of used batteries separately from other waste. Ob‐
serve the national regulations of your country.
According to the information given in the Project Planning Manuals, motors
and components cooled with liquids and compressed air can be partially sup‐
plied with externally fed, pressurized media, such as compressed air, hy‐
draulics oil, cooling liquids and cooling lubricants. Improper handling of the
connected supply systems, supply lines or connections can cause injuries or
property damage.
Risk of injury by improper handling of pressurized lines!
Do not attempt to disconnect, open or cut pressurized lines (risk of ex‐
plosion).
Observe the respective manufacturer's operating instructions.
Before dismounting lines, relieve pressure and empty medium.
Use suitable protective equipment (safety goggles, safety shoes, safety
gloves, for example).
Immediately clean up any spilled liquids from the floor due to the risk of
falling!
Environmental protection and disposal! The agents (e.g., fluids)
used to operate the product might not be environmentally friendly.
Dispose of agents harmful to the environment separately from
other waste. Observe the national regulations of your country.
MAD / MAF Asynchronous Housing Motors

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents