MAD / MAF Asynchronous Housing Motors
8.5
Double cabling
Double cabling connection dia‐
Motor connection requires two power cables if an appropriate single cable
cannot be used because of the large bending radius or because of its dimen‐
sions.
The following connection diagram shows a possible connection.
When planning the double cabling, please note the applicable in‐
stallation regulations at the installation site of the machine.
gram
①
Motor housing
②
Terminal box
③
Holding brake (option)
④
Potential equalization connection at the motor (MAF225C-0150
only)
⑤
Potential equalization connection at the machine (required for
MAF225C-0150)
⑥
Rexroth drive controller
Fig. 8-7:
Double cabling connection diagram
Connection techniques
R911295781_Edition 11 Bosch Rexroth AG
181/265