Vertical timing
Vertical Video Timing
LVAL
FVAL
DVAL
3L
5L
DATA
OB
EEN
XEEN
6.3. Operation Modes
This camera can operate in 3 primary modes.
1. TR=0
Continuous Mode.
2. TR=1
Pre-select Mode.
3. TR=2
Pulse Width Control Mode. Pulse width controlled exposure.
6.3.1.
Continuous operation
For applications not requiring asynchronous external trigger, but should run in continuous
operation, this mode is used.
For timing details, refer to fig. 13 through fig. 18.
To use this mode:
Set function:
6.3.2.
Edge Pre-select Trigger Mode
An external trigger pulse initiates the capture, and the exposure time (accumulation time) is
defined by the SH or PE command.
The resulting video signal will start to be read out after the selected shutter time.
For timing details, refer to fig. 13 through fig. 18 and fig. 19 & 20.
CM-200 MCL / CB-200 MCL
V Binning
Frame rate : 627L 44.492 fps
1+2 3+4
CCD Exposure
Fig.18. Vertical Timing for Vertical Binning
Trigger mode to "Continuous".
Scanning
V Binning
Shutter mode pre-set or programmable
Shutter speed
Programmable exp.
Other functions and settings
1233+1234 1235+1236
618L
Valid data
Pre-selected exposure.
Pre-selected exposure.
- 15 –
1L
OB
OB
TR=0
SC=0 through 4
VB=0, VB=1
SM=0 SM=1
SH=0 to 9
PE=2 to 1252