Displaying Software Revision; Overview - Simplex 4100 Operator's Manual

Displaying Software Revision

Overview

Follow these steps to display software revision information.
1.
2.
3.
4.
Press the MENU key.
Press the NEXT and PREV keys until the prompt reads, "Display Software Revision
Level?"
Press ENTER. A display similar to the following appears.
SYS REV: A9.02.13
96JOB: JOB1
Interpret this information as follows.
• SYS REV. Specifies the revision of the executive software (operating system of the
FIP) loaded on the panel.
• CFIG FORMAT: Defines the compatibility of the executive and the programmer.
• JOB: Specifies the name of the job loaded on the panel.
• REV. Specifies the revision of the job.
firealarmresources.com
CFIG FORMAT:
REV:6
9-3
13-OCT-00