System Menu - ADJ FLAT PAR TW12 User Manual

S Y S T E M M E N U
The fixture includes an easy to navigate system menu. The control panel located on the front of the
fixture, provides access to the main system menu and is where all necessary system adjustments are
made to the fixture. During normal operation, pressing MODE button once will access the fixture's main
menu. Once in the main menu you can navigate through the different functions and access the sub-
menus with the SETUP, UP, and DOWN buttons. Once you reach a field that requires adjusting, press
the SETUP button to activate that field and use the UP and DOWN buttons to adjust the field. Pressing
the MODE button once more will confirm your setting. You may exit the main menu at any time without
making any adjustments by pressing the MODE button.
The display will lock after 30 seconds. Press the MENU button for 3 seconds to unlock.
LED Display On/Off:
To set the display press the MODE button until "dXX" is displayed. "XX" represents either "on" or "oFF"
Use the UP or DOWN buttons to select either:
• "don" = LED display on at all times.
• "doFF" = LED display shuts off after 10 seconds.
LED Display Inversion:
Follow these instructions to flip the display 180°.
1. Plug the fixture in and press the MODE button until "dXX" is displayed. "XX" represents either "on"
or "oFF".
2. Press the SETUP button until "Stnd" is displayed.
3. Press the UP or DOWN buttons to reverse the display 180°.
Operating Modes:
The Flat Par TW12 has five operating modes:
• Sound-Active mode - The unit will react to sound, chasing through the built in programs.
• Static Color Mode - There are 32 colors to choose from.
• Auto Run Mode - There are 3 Auto Modes to choose from.
• WW/CW/A Dimmer Mode - Choose one of the three colors to remain static, or adjust the intensity
of each color to create a custom color.
• DMX control mode - This function will allow you to control individual DMX traits with a standard
DMX 512 controller.
12