System Menu - ADJ FOC635 User Manual

Focus Spot 6Z
CONTROL PANEL
The fixture includes an easy to navigate system menu control panel display where all necessary
settings and adjustments are made. (See image below) During normal operation, pressing the MENU
button once will access the fixture's main menu. Once in the main menu, you can navigate through
the different functions and access the sub-menus with the UP and DOWN buttons. When you reach
a field that requires adjusting, press the ENTER button to access that field and use the UP and
DOWN buttons to adjust the field. Pressing the ENTER button once more will confirm your setting.
You may exit the main menu at any time without making any adjustments by pressing the MENU
button.
LCD CONTROL PANEL LOCKOUT
When the Key Lock function is activated, the control panel will automatically lock after the time set
under the Display submenu "Screen Saver Delay".
When the Key Lock function is set to ON, the control panel will lock. Press and hold the MODE button
for 3 seconds to unlock.
When the Key Lock function is set to ON1, the control panel will lock, and will not unlock without a code.
To unlock the display follow these steps:
1. Press the UP button, and the display will change to:
2. Press the DOWN button, and the display will change to:
3. Press the UP button, and the display will change to:
4. Press the DOWN button, and the display will change to:
5. Press the ENTER buttton, and the display will be unlocked.
If the button sequence was entered correctly, the display and control panel will unlock. If the button
sequence was entered incorrectly, the display will return to the DMX addess display.
ADJ Products, LLC - www.adj.com - Focus Spot 6Z User Manual Page 23
* (one * appears).
(two * appear).
* *
* * * (three * appear).
* * * * (four * appear).

System Menu