ADJ FLAT PAR TW12 User Manual page 13

S Y S T E M M E N U
DMX Mode:
Operating through a DMX controller gives the user the freedom to create custom programs tailored to
his or her individual needs. The Flat Par TW12 has 6 DMX modes: 2 Channel mode, 3 Channel mode,
4 Channel mode, 5 Channel mode, 8 Channel mode, and 9 Channel mode.
1. This function will allow you to control each individual fixture's traits with a standard DMX 512 controller.
2. To run your fixture in DMX mode, press the MODE button until "d.XXX" is displayed. "XXX" represents
the address that is currently in use. Use the UP or DOWN buttons to select your desired DMX
address, then press the SETUP button to select your DMX Channel mode.
3. Use the UP and DOWN buttons to scroll through the available DMX Channel Mode options. See the
Channel Mode sections of this manual for detailed descriptions of DMX traits in each DMX channel mode.
4. After you have chosen your desired DMX Channel mode, link your device to any standard DMX
controller using the XLR connections on your device and your controller.
WW/CW/A Dimmer Mode:
1. Plug the fixture in and press the MODE button until one of the following is displayed:
• "H.XXX" for Warm White dimming mode.
• "C.XXX" for Cool White dimming mode.
• "A.XXX" for Amber dimming mode.
2. Press the UP and DOWN buttons to adjust intensity.
3. After you have adjusted the colors to the desired levels, you can then activate strobing by pressing
the SETUP button.
4. "S.XXX" will be displayed, indicating that the device is in strobing mode. The strobing can be adjusted
between "S.000" (strobe off) to "S.015" (fastest strobe).
Sound Active Mode:
In this mode the Flat Par TW12 will react to sound, and chase through the different colors.
1. Plug the fixture in and press the MODE button until "So-X" is displayed. "X" represents the sound
active mode (1-8) that is currently in use.
2. The fixture will now change via sound.
3. To adjust the sound sensitivity, press the SET UP button. "SJ-X" will be displayed. Use the UP or
DOWN buttons to adjust the sensitivity. "SJ-1" is the least sensitive, and "SJ-8" is the most sensitive.
Auto Run Mode:
1. There are 3 Auto Run Modes to choose from: Color Fade, Color Change, and both modes running
together. The running speed is adjustable in all 3 modes.
2. Plug the fixture in and press the MODE button until either "AF-X", "AJ-X", or "A-JF" is displayed.
• AF-X = Color Fade mode, with 8 Color Fade modes to choose from. Use the UP or DOWN buttons
to scroll through the different Auto Fade modes.
• AJ-X = Color Change mode, with 8 Color Change modes to choose from. Use the UP or DOWN
buttons to scroll through the different Auto Change modes.
• A-JF = Both Color Fade and Color Change modes running.
3. After you have chosen your desired running mode, press the SETUP button until "SP.XX" is displayed.
When this is displayed you can adjust the running speed of your desired program. Use the UP or
DOWN button to adjust the speed between "SP.01" (slowest) and "SP.16" (fastest).
4. Once you have set your desired running speed, press the SETUP button to return to your desired
13