Motion - Eneo IER-25R040004A User Manual

4.6.3

Motion

To set and schedule motions across channels
Motion > Setup
To set motions across channels
No. Name
1
2
3
4
5
6
7 Group Rec.
8
9 Preset
10 Copy to Motion
Note
IER-25Nxxx
All manuals and user guides at all-guides.com
Figure 4-37 Event > Motion > Setup
Table 4-39 Event > Motion > Setup Item and Description
CH Display channels.
Use Select/deselect whether to use motion function in the channel.
Area Display the motion area.
Sens. Select the sense level of the motion sensor (Level 1~10).
Beep Select use time of buzzer (null, 5 sec, 10 sec, 20 sec, 30 sec, 1 min, 10
min, 30 min, and 1 hour).
Alarm Set alarm output.
Select the camera to record simultaneously.
Noti. Set email notices.
Set preset of PTZ camera.
Copy motion set value to other channels. For more information about set
Setup value copy, see section "4.5.2 Stream > Main Stream in Stream."
Placing your mouse on Alarm, Group Rec, Noti., Preset and clicking editing icon
( ) in right corner displays Event: Alarm screen. For more information about
Event: Motion screen, see section "4.6.2 Alarm In > Setup in Alarm In."
Function
Seite 62