Motion - Eneo MSR-24N040004A User Manual

4.6.3

Motion

To set and schedule motions across channels
Motion > Setup
To set motions across channels.
No. Name
1 CH
2 Use
3 Area
4 Sens.
5 Beep
6 Alarm
7 Group Rec.
8 Noti.
9 Preset
10 Copy to Motion
Setup
Placing your mouse on Alarm, Group Rec, Noti., Preset and clicking editing
Note
icon(
73
Figure 4-45 Event > Motion > Setup
Table 4-47 Event > Motion > Setup Item and Description
Display channels.
Select/deselect whether to use motion function in the channel.
Display the motion area.
Select the sense level of the motion sensor (Level 1~10).
Select use time of buzzer (null, 5 sec, 10 sec, 20 sec, 30 sec, 1 min, 10
min, 30 min, and 1 hour).
Set alarm output.
Select the camera to record simultaneously.
Set email notices.
Set preset of PTZ camera.
Copy motion set value to other channels. For more information about set
value copy, see section "4.5.2 Stream > Main Stream in Main Stream."
) in right corner displays Event : Alarm screen. For more information about
Function