Stream - Eneo IER-25R040004A User Manual

4.5.2

Stream

To set the image resolution when event occurs across channels or general recording is in process.
Stream > Main Stream
To set the image quality and resolution of Main Stream
Table 4-30 RECORD > Stream > Main Stream Item and Description
No. Name
1
2 Resolution
Framerate
Bitrate
3 Continuous
4 Event
5 Pre-Alarm
6 Post-Alarm
7 Copy Stream
Setup
IER-25Nxxx
All manuals and user guides at all-guides.com
Figure 4-28 RECORD > Stream > Main Stream
CH Display channels.
Show camera main stream setup status.
Select recording stream in case of Continuous mode.
Select recording stream in case of Event mode.
Start recording before set time, if event occurs (null, 1 sec, 2 sec, 3 sec, 4
sec, and 5 sec).
Recording after set time until event ends (null, 5 sec, 10 sec, 30 sec, 1 min,
5 min, and 10 min).
Copy main recording image set value to other channels.
Function
Seite 53