Table of Contents
Advertisement
3.3 Configuring the
Sampler
3.3.1 Set Clock
SELECT OPTION: (<-->)
SET CLOCK
ENTER TIME AND DATE:
HH:MM
DD-MON-YY
FIRST SAMPLE AT:
08:00 16-JUN
Times —
When entering times, use the 24-hour format,
sometimes known as "military time." In this format,
times after 12:00 noon continue to increment (1:00 pm
= 13:00, 2:00 pm = 14:00, etc.), until midnight or 00:00.
Before operating the 4700 Sampler, configure the sampler
software. Doing so will set the time and date, and allow the
sampler controller to correctly use the hardware and external
connections.
To begin from the Main Menu, press the Next or Previous button
until the CONFIGURE option blinks. Then, press the Enter
button. The sampler displays the first configuration setting.
You can step through the Configure options using the Next or
Previous buttons. To review or change the settings for the dis-
played option, press the Enter button.
The sampler will return to the SELECT OPTION <– –> screen
when there are no more settings for the selected option. To
return to the SELECT OPTION <– –> screen sooner, press the
Stop button. Pressing the Stop button at any input screen will
exit the current screen without saving changes. You can press the
Stop button again to exit the sampler configuration screens and
return to the Main Menu screen.
Select this option to set the sampler's internal clock to your local
time and date. The sampler uses this internal clock to start and
stop sample programs, and to time stamp events in the log.
1. Press Enter.
2. Press the Number buttons to type the hours (using 24-hour
format). Then, press Enter to accept the hours and move to
the minutes. Repeat for all settings and the display will
return to the SELECT OPTION <– –> screen.
About Times and Dates
Dates —
When entering dates, use a day-month-year format.
Although the screens above display the date as a
three-character abbreviation and a two-digit numeric
value, months are always entered by typing the
numeric value (1=January, 2=February, and so on).
Isco 4700 Refrigerated Sampler
Section 3 Programming
ENTER TIME AND DATE:
HH:MM
DD-MON-YY
3-3
Advertisement
Table of Contents
