Isco 4700
Refrigerated Sampler
Section 3 Programming
3.1 Control Panel
Description
Figure 3-1
Control panel buttons
In this section...
• Control Panel Description
• Getting Started, page 3-2
• Configuring the Sampler, page 3-3
• Sampling Program Overview, page 3-10
• Programming Steps, page 3-13
• Programming Examples, page 3-20
Table 3-1 Control Buttons
Icon
Name
Description
Power
Places the sampler in the On or Standby modes.
Note: In either modes, mains power is always con-
nected to the refrigeration system.
Numbers Types a number.
Pump
At the Main menu, press this button to run the pump
Reverse
in the reverse direction to purge the suction line. In
(Purge)
other menus, press this button to type the number 1.
Pump
At the Main Menu, press this button to run the pump
Forward
in the forward direction to fill the suction line. In other
(Fill)
menus, press this button to type the number 3.
3-1