IBM Universal Tape Library User Manual page 77

Table 21. SNMP trap list (continued)
Event
XY Axis Position Lost
XY Axis Retry
XY Axis Stalled
XY Axis Timeout
Z Axis Jammed
Z Axis Position Lost
Z Axis Retry
Z Axis Stalled
Z Axis Timeout
Position to XYZ Failed
Failed to read NVM (status,
region)
Failed to write NVM (status,
region)
Init element structure failed
Read from NV (backplane SPI)
failed (status)
Could not convert GUI addr to
physical (elem type/instance)
Could not convert logical addr
to physical (elem type/instance)
Could not find drive element in
partition (instance/part id)
Could not find load port in
cabinet (instance/cab index
Could not find load port in
partition (instance/part id)
Could not find storage element
in cabinet (instance/cab index)
Could not find storage element
in partition (instance/part id)
Drv type from dmgr is not
known (type)
Event description
The portion of the robotics that moves the
XY axis cannot move its motor to the
expected internal limits.
The portion of the robotics that moves XY
has exceeded internal retries.
The portion of the robotics that moves the
XY axis cannot move its motor to the
expected internal limits.
The portion of the robotics that moves XY
could not position within its allotted time.
The portion of the robotics that positions
up and down cannot move its motor.
The portion of the robotics that moves the
up/down axis cannot move its motor to
the expected internal limits.
The portion of the robotics that moves up
and down has exceeded internal retries.
The portion of the robotics that moves the
up/down axis cannot move its motor to
the expected internal limits.
The portion of the robotics that moves up
and down could not position within its
allotted time.
The robotics could not move to any axis
position.
The robotics backplane has failed.
The robotics backplane has failed.
A firmware error has occurred.
The robotics backplane has failed.
An element address is bad.
An element address is bad.
An element address is bad.
An element address is bad.
An element address is bad.
An element address is bad.
An element address is bad.
A firmware error has occurred.
Category Reported by
Warning Servo
Warning Servo
Warning Servo
Warning Servo
Warning Servo
Warning Servo
Warning Servo
Warning Servo
Warning Servo
Warning Servo
Critical Sys manager
Critical Sys manager
Critical Sys manager
Warning Sys manager
Warning Sys manager
Warning Sys manager
Warning Sys manager
Warning Sys manager
Warning Sys manager
Warning Sys manager
Warning Sys manager
Critical Sys manager
Appendix C. SNMP trap list
67