Operating The Library - IBM Universal Tape Library User Manual

Table 10. Status page information
Information Description
Overview This page is the Remote Management utility
home page. It indicates the overall status of
the library
Hardware This page displays the status of the library
components or a link to display status.
Event Log This page displays the library events. The
events are displayed in the following
categories:
v All: Display all events
v Hard: Display hardware events
v Soft: Display software events
v Update: Display library update events
v Boot: Display library boot sequence events
For each category, you can specify the
following priorities:
v Critical Event
v Warning Event
v Information Event
Statistics This page displays the library statistics or a link
to the statistics for a component.
Drive Log This page displays the status of the tape
drives.

Operating the library

Use the Operations page to perform the following tasks:
v Find cartridges
v Move cartridges
v Inventory cartridges
v Control tape drives
26
Universal Tape Library User's Guide
Access procedure
The Overview page is displayed when the Remote
Management utility is started.
To display hardware information, complete the
following steps:
1. From the Status page, click the Hardware tab.
The Hardware Status page is displayed.
2. Expand the component that you want status
for. If the status of the component is displayed
as a link, click the link to display the status of
the component.
To display event information, complete the
following steps:
1. From the Status page, click the Event Log
tab. The Event Log page is displayed.
2. Specify the date and time period
3. Specify the event category and event priority.
4. Specify the cabinet.
5. Click View. The event information is displayed.
To display the statistics, complete the following
steps:
1. From the Status page, click the Statistics tab.
The Statistics page is displayed.
2. Expand the component that you want status
for. If a link is provided, click the link to display
the statistics for that component.
To display the tape drive status, from the Status
page, click the Drive Log tab. The Drive Log page
is displayed.