CHAPTER 4 VOICE ONLY WT41N0
Introduction
Since the Voice Only WT41N0 does not have a display, access to settings and controls must be done using a
remote display software, such as MotoRC or ActiveSync Remote Display.
MotoRC Software
Download the MotoRC application from the Motorola Support Central web site:
http://supportcentral.motorola.com. Follow the instructions provided with the software to install on a host
computer.
Microsoft ActiveSync Remote Display Software
Download Windows Mobile Power Toys from the Microsoft web site: http://www.microsoft.com. Follow the
instructions with the software to install on a host computer.
Ensure that ActiveSync is installed on the host computer. See
information.
Connection to Host Computer
To connect the Voice Only WT41N0 to a host computer:
Connect the Single Slot Serial/USB cradle to the host computer. See
1.
for setup instructions.
Insert the Voice Only WT41N0 into the cradle.
2.
If ActiveSync was installed properly, the host computer automatically detects the Voice Only WT41N0 and
3.
begins ActiveSync. The ActiveSync windows appears.
Select the Yes radio button to create a partnership with the host computer or select No radio button to
4.
connect as a guest.
Click Next. The Microsoft ActiveSync window indicates that it is connected to the Voice Only WT41N0.
5.
REMOTE CONTROL
Chapter 3, Synchronization
Single Slot USB Cradle on page 2-3
for more