Motorola WT41N0 Integrator Manual page 130

9 - 8 WT41N0 Integrator Guide
Troubleshooting the Wearable Terminal (Continued)
Table 9-1
Problem
Wearable terminal turns
itself off.
A message appears
stating that the
wearable terminal
memory is full. (not
applicable to voice only
configuration).
Cause
Wearable terminal is The wearable terminal turns off after a period of inactivity. If
inactive. the wearable terminal is running on battery power, this
period can be set to 30 sec., 1, 2, 3, 4, 5 or 6 minutes. If the
wearable terminal is running on external power, this period
can be set to 1, 2, 3, 5, 10, 15 and 30 minutes.
Check the power settings by selecting
Control Panel
Change the setting if a longer delay is required before the
automatic shutoff feature activates.
Voice Only WT41N0 Return Voice Only WT41N0 suspend setting to factory
was set to suspend. default (disabled).
Battery is depleted. Replace or recharge the battery.
Battery is not inserted Insert the battery properly (see
properly.
Main Battery on page
The wearable Replace or recharge the battery.
computer's battery is
low and it powers
down to protect
memory content.
Too many files stored Delete unused memos and records. You can save these
on the wearable records on the host computer.
terminal.
Too many If you have installed additional applications on the wearable
applications installed terminal, remove them to recover memory.
on the wearable
Select
terminal.
icon.
Select the unused program and select Remove.
Solution
> icon >
Power Advanced
Installing and Removing the
1-3).
>
>
Start Settings Control Panel
>
>
Start Settings
tab.
>
Remove Programs