APPENDIX B SOFTWARE SETUP
Bluetooth Configuration Setting
The wearable terminal supports both the Microsoft Bluetooth stack and the StoneStreet One Bluetooth stack.
Only one Bluetooth stack can be used at a time. By default, the StoneStreet One Bluetooth stack is enabled. A
registry key on the wearable terminal can be modified to disable the StoneStreet One stack and enable the
Microsoft stack.
Using a registry editor, navigate to the following:
[HKEY_LOCAL_MACHINE\Software\SymbolBluetooth
Edit the following key:
"SSStack"=dword:1
where:
0 = enable Microsoft stack and disable StoneStreet One stack (default)
1 = enable StoneStreet One stack and disable Microsoft stack
After setting the registry key, warm boot the wearable terminal.