Getting Started; Installing And Removing The Main Battery; Installing The Main Battery - Motorola WT41N0 Integrator Manual

Interface Connector
Rubber Plug
Cradle Connector
Wearable Terminal Back View
Figure 1-3

Getting Started

In order to start using the wearable terminal for the first time:
Install the main battery
•
Charge the main battery and backup battery
•
Start the wearable terminal.
•
NOTE The main battery can be charged before or after installation into the wearable terminal. Use the Single
Slot USB cradle or Four Slot Spare Battery Charger to charge the main battery before installation, or the
Single Slot USB cradle or Four Slot Ethernet cradle to charge the main battery after installation.

Installing and Removing the Main Battery

Installing the Main Battery

Before using the wearable terminal, install a lithium-ion battery by placing the battery into the wearable terminal
as shown in
Figure
NOTE Ensure the battery is fully inserted. An audible click can be heard as the battery is fully inserted. A
partially inserted battery may result in unintentional data loss.
When a battery is fully inserted in a wearable terminal for the first time, upon the wearable terminal's first power
up, the device boots and powers on automatically.
1-4.
Getting Started
Battery
Battery Release
Cleat
Interface Connector
(shown without Rubber Plug)
1 - 3