Table of Contents
Advertisement
HID Data
Table 6-14
Item
Enable Key Repeat
Delay
Rate
Profiles
Use Profiles to load or remove Bluetooth service profiles. If a profile is not used, it can be removed to save
memory.
Tap a check box next to the profile to load (activate). The serial Port profile is always active and cannot be
1.
removed.
Tap Select All to select all profiles or tap Deselect All to deselect all profiles.
2.
Tap Apply to activate the profiles and then Close to exit the application.
3.
System Parameters
Use System Parameters to set device connection settings.
HID Tab
Table 6-15
Item
Page Timeout
Link Supervision Timeout
Miscellaneous Tab
Use the Miscellaneous tab to set color and types to better view active connections.
Miscellaneous Tab
Table 6-16
Item
Highlight Connections
Apply Text Style
Apply Text Color
Enables key repeat functionality.
To increase key repeat delay, drag the Delay slider to the right. To
decrease key repeat delay, drag the Delay slider to the left.
To increase key repeat speed, drag the Rate slider to the left. To
decrease key repeat speed, drag the Rate slider to the right.
Sets the amount of time the wearable terminal searches for a device
before moving on to the next device.
Sets the amount of time that the wearable terminal will wait for a device to
come back into range after it has gone out of range. If the device does not
come back into range by the set time, the wearable terminal drops the
connection.
Select the connection type to highlight when connected. In the Wizard
Mode, the only option is Favorites or None. In the Explorer mode the
options are None, Tree View Only, List View Only or tree and List View.
Select the text style to be applied to the connection text.
Select the text color to be applied to the connection text.
Description
Description
Description
Bluetooth 6 - 29
Advertisement
Table of Contents
Troubleshooting
