Voice Only Wt4090 Boot Up - Motorola WT4070 User Manual

Splash Screen
Figure 1-18
OEM VERSION 02.17.0001
Start Up Window
Figure 1-19
Use the screen to align the touch screen:
Calibration
Carefully press and briefly hold on the center of the
1.
target moves and stops at different locations on the screen. This enters the new calibration settings.
Calibration Screen
Calibration Screen
Figure 1-20
Once all of the new calibration settings are input, tap the screen or press the
2.
calibration settings. Press

Voice Only WT4090 Boot Up

When the Voice Only WT4090 is powered on for the first time the three LEDs on the front housing blink as follows:
OEM VERSION 03.17.0001
Calibration
Confirm Calibration
Screen
to discard the new calibration settings.
ESC
Getting Started 1 - 15
OEM VERSION 04.20.0004 or
05.30.0001
screen target. Repeat the procedure as the
button to save the new
ENTER