About This Manual
This manual discusses the use of the Anybus-X Ethernet to J1939 Gateway. It
describes how to install, configure, and operate the module.
Important User Information
The data and illustrations found in this document are not binding. We reserve the
right to modify our products in line with our policy of product development. The
information in this document is subject to change and should not be considered as
a commitment by HMS Industrial Networks. HMS Industrial Networks assumes
no responsibility for errors that may appear in this document
There are many applications of the Anybus-X module. Those responsible for the
use of this device must satisfy themselves that all necessary steps have been taken
to verify an application meets all performance and safety requirements including
any applicable laws, regulations, codes, and standards.
The illustrations and samples in this guide are intended solely for the purpose of
example. HMS Industrial Networks does not assume responsibility or liability for
actual use based upon the examples shown in this publication.
Modbus/TCP is a trademark of Schneider Automation.
EtherNet/IP is a trademark of ODVA.
Microsoft, MS-DOS, and Windows are trademarks of Microsoft Corporation.
© 2005 HMS Industrial Networks
Preface
Preface iv
AB7665 User manual
Need help?
Do you have a question about the Anybus-X and is the answer not in the manual?