Hardware Description - HMS Anybus-X User Manual

Hardware Description

All connections, whether power or fieldbus, to the Anybus-X are made on one end
of the module. Phoenix connectors are provided for power and J1939 connections.
An RJ-style connector is provided for Ethernet connection. There is a 9-pin D-
Subminiature connector for the auxiliary RS-232 port that is used for device con-
figuration. See "Installation" Page 2-1 for more details on the connectors.
There is an 8 position DIP switch on the end of the module that can be used to
select a portion of a default IP address that may be used to permit an intranet con-
nection. See "Ethernet Network Configuration" Page 3-6 for more details on con-
figuring the IP address using the switches.
On the front of the Anybus-X module are 6 LEDs that are used for status indica-
tion. These LEDs provide visual status for the overall module, the J1939 interface,
and the Ethernet interface. See "Anybus-X LED´s Page 10-1 for details on how
the LEDs are used.
The back of the module has a DIN rail mount to allow the module to be mounted
on a DIN rail.
© 2005 HMS Industrial Networks
Anybus-X Module Description
AB7665 User manual
1-5