Inventory - Grizzly G0462 Owner's Manual

Inventory

the following is a list of the small components
shipped with your machine. Lay the components
out to inventory them.
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
box 1 Inventory (figure 3)
A. Lathe unit ................................................... 1
b. Faceplate 6" ............................................... 1
c. hardware Bag ............................................ 1
D. Knockout tool ............................................. 1
E. Flat Wrenches 32mm ................................. 2
Hardware bag Inventory (figure 4)
f.
spur Center ................................................ 1
G. Live Center ................................................. 1
H. tool rest Lock Lever .................................. 1
I. hex Wrenches 3, 4, 6mm .................. 1 each
J.
Cap screws m8-1.25 x 35 .......................... 8
K. Quill Lock Lever .......................................... 1
L. Lock Washers 8mm.................................... 8
box 2 Inventory (figure 5)
M. stand Legs ................................................. 2
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
SUffOcATION HAzARD!
Immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.
g0462 Wood Lathe (mfg. since 3/10)
B
Qty
F
Qty
K
Qty
figure 4. hardware bag inventory.
A
C
d
figure 3. Box 1 inventory.
g
J
L
m
figure 5. Box 2 inventory.
e
h
i
-11-