Unpacking - MIMAKI JV300-130 Installation Manual

Hide thumbs Also See for JV300-130:

Table of Contents

INSTALLATION GUIDE > Printer Assembly > Unpacking

Issue

Model

JV300

4.1 Unpacking

 Work procedures

Lift up vertically

Tape

Leg stay packing assy.

Revised 2014.05.08 F/W ver. 1.00 Remark

2014.04.11

1. Remove the lid and sleeve of the box packing the main unit, cut

Lid

2. Take out each packing box.

Sleeve

Main unit tray

3. Remove the leg stay packing assy.

Metal sheet for

packing

Rubber feet

the tapes stuck on 4 corners of the main unit tray.

 Because of the small clearance between the main

unit and sleeve, lift the sleeve up vertically to

avoid touching the main unit.

 Do not dispose the metal sheet for packing and

the rubber feet since these will be stored by

attaching to the main unit after the installation of

machine.

Rev.

1.1

4.1

R.1.1

P.2

Table of Contents

Jv300-160