Setting The Voltage Selector - MIMAKI JV300-130 Installation Manual

INSTALLATION GUIDE > Power Supply Related > Setting the Voltage Selector
Issue
Model
JV300

6.1 Setting the Voltage Selector

 Outline
The device voltage should be switched to 100 to 120V or 200 to 240V to match the power supply voltage.
 Because the device may be damaged by an incorrect setting, do not change the setting after
installation.
© 2014 MIMAKI ENGINEERING CO.,LTD.
Revised
2014.04.11
1. Switch the voltage selector switch to the side for the voltage
F/W ver. 1.00 Remark
you are using.
 220V at shipping.
Rev.
1.0
1
2
3
4
5
6
7
6.1 R.1.0 P.2