Graco XM Plural-Component Brochure & Specs page 3

Build a System for Your Application
Fully configurable – simply select the accessories required for your material and application
More flexibility means more affordability
With Graco XM Plural-Component Sprayers, you have the flexibility to select the essential equipment on your system – no more, no less – to
complete your jobs accurately and reliably. If your application does not require heaters, feed pumps or hoppers, this flexibility may provide you
with a lower cost option. The components shown below are available as options on your configured unit. Some assembly is required.
Junction Box
• Conveniently houses switches
and breakers for heaters
• Not approved for
explosive atmospheres
Hose Rack Kit
Viscon Fluid Heaters
®
• Choose standard or
model approved for
explosive atmospheres
Rear Mounted Hoppers
Visit www.graco.com/xm and use the Graco XM configuration tool to choose the accessories you need
** Not approved for use in explosive atmospheres unless the base model, all accessories and wiring comply with national, state and local codes
Graco XM Plural-Component Sprayer (base model plus options)**
Transfer pumps
• Choose Graco T2 or Monark
Twistork
• Helps maintain proper
material consistency
Material Hoppers
• Side or rear-mount
• Choose 20-gal or 7-gal
(76 or 26 liter)
Hopper Heater
• Excellent for highly viscous materials
• Standard 240-volt, 1500 watt immersion heaters
• Use optional circulation kit (256273*)
for explosive atmospheres
*Viscon fluid heater approved for use
in explosive atmospheres must be ordered separately
Caster Kit
5:1
®
Agitator
®
3