Technical Specifications - Graco XM Plural-Component Brochure & Specs

Technical Specifications & Configurable Options
Everything you need to make an informed decision

Technical Specifications

Dimensions
Base Unit (no hoppers) ................................... 39W x 70H x 38D in (99 x 178 x 97 cm)
Side mounted hoppers ................................. 99W x 70H x 38D in (252 x 178 x 97 cm)
Rear mounted hoppers ............................... 57W x 70H x 65D in (145 x 178 x 165 cm)
Mix ratio range .............................................................. 1:1 to 10:1 (in 0.1 increments)
Ratio tolerance range ....................................................................................... +/- 5%
Fluid filtration ............................................................... 60 mesh (238 micron standard)
Flow rates
Minimum .................................................................................... 1 qt/min (0.95 lpm)*
Maximum ...................................................................................... 3 gpm (11.4 lpm)*
Air inlet ........................................................................................................ 3/4 npt (f)
Fluid inlets without feed kits ................................................................... 1-1/4 npt (m)
Max mixed fluid working pressure
50:1.............................................................................. 5200 psi (358 bar, 35.8 MPa)
70:1.............................................................................. 6300 psi (434 bar, 43.4 MPa)
Air supply pressure range.........................50-150 psi (3.5 to 10.3 bar, 0.35 to 1.0 MPa)
Max pump air set pressure
50:1................................................................................... 100 psi (7.0 bar, 0.7 MPa)
70:1................................................................................... 90 psi (6.2 bar, 0.62 MPa)
Max pump inlet fluid pressure ............................................... 250 psi (17 bar, 1.7 MPa)
Max air consumption at 100 psi
(0.7 MPa, 7.0 bar)
Configurable options loaded with features
Hoppers
20-gal (76 l) hoppers are:
• Jacketed for heated water or oil
• Made of rugged,
double-wall polyethylene
• Available in heated* or standard
7-gal (26 l) hoppers are:
• Excellent for high ratio applications
(not included on some models
*Actual flow rates vary by material type
......... 75 scfm/gpm (0.56 m /min/lpm)
3
Viscon Fluid Heater*
• 240 VAC, 4000 watts
• Other voltage options
sold separately
* Models approved for explosive atmospheres are available
Ambient temperature range
Operating ........................................................................... 32° to 130°F (0° to 54°C)
Storage............................................................................. 30° to 160°F (-1° to 71°C)
Weight
Base machine ................................................................................... 1160 lb (526 kg)
Fully configured ................................................................................ 1550 lb (703 kg)
(Includes heated hoppers, feed pumps, heaters and junction box)
)
Sound pressure .................................................... 86 dBA at 100 psi (7.0 bar, 0.7 MPa)
Fluid viscosity range ........................................................................... 200-20,000 cps
(heavier viscosities can be sprayed using heat, recirculation and/or pressure feeding
Wetted parts
Suction tubes.............................................................................................. Aluminum
Flush pump ........................................................... Stainless steel, aluminum, carbide,
Hoses ............................................................................................................... Nylon
Pumps (A and B) ............................... Carbon steel, alloy steel, 303, 440, 17-ph grades
Metering valves .................... Carbon steel, nickel plating, carbide, polyethylene, leather
Manifold ................................. Carbon steel, nickel plating, carbide, 302 stainless steel,
Mixer ....................................................... Stainless steel housing with acetal elements
Spray gun ................................................... Stainless steel, acetal, polyethylene, nylon,
polypropylene, carbide, polyurethane, solvent-resistant o-rings
Transfer Pumps*
• Feeds material to main pumps
• Recommended for highly
viscous materials
• Easily mounts to 20-gal
(76 l) hoppers or drums
• Choose Graco T2 or
Monark 5:1 transfer pump
(No heaters, hoppers or junction box)
UHMWPE and PTFE
stainless steel, zinc and nickel plating, ductile iron,
tungsten carbide, and PTFE
PTFE, UHMWPE
Twistork Agitators
• Helps maintain proper
material consistency
• Easily mounts on 20-gal (76 l)
hoppers or drums
• Approved for use
in explosive atmospheres
)
5