Start Of Sample Program Export And Debug - Fujitsu FM3 family User Manual

4.1.2 Start of Sample Program Export and Debug

(1) ICE Connection
The equipment connection diagram for exporting the program to the microcontroller
is shown in Figure 12.
The PC and simple AV system board are connected via ICE.
Figure 12 Equipment Connections for Exporting Program
(2) Exporting the Program to the Microcontroller
Click the location shown in Figure 13 to export the program to the microcontroller.
Figure 13 Exporting the Program to the Microcontroller
Writes program in microcontroller. マイコンへプログラムを書き込み
16
AN706-00040-2v0-E