Njoy Shed 625 Instruction Manual page 5

3.1 Connecting your equipment and first usage
Step 1. Connect the UPS to a grounded AC power
outlets.
Step 2. Please turn ON the ON/OFF switch and
charge the battery at least 8 hours for a full
load before you start to use the UPS.
Step 3. Plug your PC or peripheral equipment
(printer, tv, scanner, fax, speakers etc.) into
the power outlets of the UPS
provide emergency battery backup power during
mains blackouts as well as surge protection
from surges and spikes).
CAUTION
Do NOT plug
LASER PRINTERS
into any of the
outlets.
Step 4. Connect the USB cable to your computer.
Step 5. Connect the network / internet cables to the
RJ45 outlet.
04
(these will
Do NOT plug any
SURGE STRIPS
into any of the
outlets.