Table of Contents
Advertisement
RX13T CPU Card User's Manual
4.
Usage
To use this product connecting with INV-BRD, mount CN5, CNA, and CNB as shown in Figure 3-1 and Figure 3-2.
Also, mount CN3 and CN4 as necessary. Please be sure to check the orientation of each connector when mounting.
Before connecting to the INV-BRD, be sure to write the software corresponding to the INV-BRD to this product. The
board may be damaged if it is connected to the INV-BRD with the factory default software or with software that is not
compatible with the inverter board.
For details on writing software, please refer to 5.2. For the operation of the written software, refer to the application
note of each software.
Please refer to the user's manual of each INV-BRD for the connection method with INV-BRD.
R12UZ0051EJ0110
Page 10 of 18
2022.2.21
Advertisement
Table of Contents
