Takara Belmont YUME ESPOIR Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Takara Belmont Manuals
  4. Indoor Furnishing
  5. YUME ESPOIR
  6. Operating instructions manual

Takara Belmont YUME ESPOIR Operating Instructions Manual

Hide thumbs Also See for YUME ESPOIR:
Table of Contents

Advertisement

Quick Links

Download this manual
 YUME ESPOIR
Basin body
[For Back wash] Type
Seat body
[Fixed Legrest] Type
[Movable Legrest] Type
Seat
[Fixed Legrest] Type
[Movable Legrest] Type
Base plate
This product is designed for shampooing and hair/scalp care.
YUME ESPOIR
Operating Instructions
(Image is of "Fixed legrest" type)
(Image is of "Movable legrest" type)
Thank you for purchasing this Takara Belmont product.
The instructions contained in this booklet should
be thoroughly read and understood before use.
Using this product before reading this operating
instructions may result in an accident.
This product is an industrial shampoo unit designed
for barbers and hair salons. Only use this product for
its intended purpose and do not use it for
non-hairdressing work.
Keep this instruction and refer back to them when
required.
1

Table of Contents

Version 5
February 2019
2
2
7
9
9
10
12
12
13
14
18
22
25
25
25
26
26
26
27
28
30

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the YUME ESPOIR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Takara Belmont YUME ESPOIR

Summary of Contents for Takara Belmont YUME ESPOIR

  • Page 1: Table Of Contents

    After-sales Service Specifications Dimensions Procedures for Daily Inspections Thank you for purchasing this Takara Belmont product. The instructions contained in this booklet should be thoroughly read and understood before use. Using this product before reading this operating instructions may result in an accident.

  • Page 2: Description Of Warning Symbols

    These precautions are important for ensuring safety. Adhere to these precautions at all times. Takara Belmont is not responsible for any damage or risk to the person using this product or those around them due to accidents if this product is used without adhering to the "Safety Precautions", "Precautions for Use"...
  • Page 3 Warning Do not climb on the seat. Stop using this product if it does not move, or if it feels like there is a Failure to follow this problem present. instruction may damage the seat, or cause Stop using this product if the seat does not injury.
  • Page 4 Warning Ground items properly. Disassembly and repairs/modifications are prohibited. Failure to follow this instruction may cause Disassembly electric shock if there is a malfunction or ground Disassembly, repairs and modifications must not Prohibited leakage. Contact a professional for grounding. (if be conducted by people other than qualified an extension power cable is used) repair technicians.
  • Page 5 Warning Periodically remove dust from the Return the water temperature to an power plug. appropriate position after using hot water. (if an extension power cable is used) Periodically remove any dust or dirt from the Return the water temperature to an appropriate power plug and power outlet.
  • Page 6 Caution Do not use outdoors. Do not use this product with the This product is designed for indoor use. Do not cover broken. install this product outdoors or within a vehicle. Replace the cover if it breaks. Continuing to use Be sure to only use this product inside a barber or this product with a broken cover may cause a hair salon.

  • Page 7: Precautions For Use

    Precautions for Use Caution Close the tap firmly. Do not wipe with chemicals or apply heat. After use or shampooing is complete, turn the Failure to follow this instruction may cause taps firmly in a clockwise direction and turn the deformation or discoloration.
  • Page 8 Caution If chemicals spill on to this product, Do not apply steam directly to the wipe them dry as soon as possible. leather. If chemicals such as hair dyes spill on to this When using the steamer to perform hair/scalp care product, wipe them dry as soon as possible.

  • Page 9: Precautions For Handling Synthetic Leather

    Precautions for Handling Synthetic Leather Handling precautions  Stains caused by clothing dyes The synthetic leather of this product may become stained by direct contact with clothes or belts. If there is stains, wipe clean as quickly as possible with a 10% detergent solution diluted using water to prevent permanent staining. ...

  • Page 10: Name Of Parts

    Name of Parts Shower head  Main body bracket Backrest Backrest Basin Seat Seat Main body cover (front) Base plate Legrest Foot switch Power switch <For Back wash (same as YUME basin)> Neck cushion Backrest cover Head pillow Drain cap Shower head Power switch Mohair tape...

  • Page 11: Precautions On Resin (Plated) Parts

    Check that there are no flaws, cracks, or peeling of the plated surface of the knobs Caution before using the product. If peeling is observed, immediately stop using the product and contact your closest dealer or Takara Belmont. Continued operation may result in injuries. Example of Flaws on the Example of Peeling of the...

  • Page 12: Accessories

    Accessories <Same parts for back wash (same as YUME basin), side wash basin> • Tickle stopper rubbes...1 • Drain cap...1 • Hair catcher...1 • Mohair tape for replacement...1 • Neck cushion...1 • Head pillow...1 set • Installation instructions...1 • Instruction...1 •...

  • Page 13: Preparations

    Preparations <Back wash (same as YUME basin)>  Attach neck cushion Neck cushion Basin side Hook (1) Align the neck cushion as shown in the illustration, and fit the neck cushion on the attachment fittings. (Make sure the attachment direction is correct.) Seat side The long edge faces...

  • Page 14: How To Use

    <Seat>  Power Insert the power plug into a power outlet. (only if an extension power cable is used) Power switch Turn the power on. The power switch is on the left of the seat when viewed from the basin. [OFF] [ON] The power will turn on if the power switch is pushed to the right...
  • Page 15 [How to set the preset position] The standard preset position is adjusted in advance when the product is shipped from the factory. To change the preset position, follow the procedure below to set the new position. 1. With the UP/DN (DOWN) switch, lift or lower the seat to the desired height to set as the preset position.
  • Page 16  Using the YUME shower head  Return the shower head to the Shower head shower head bracket after use so that the spray nozzle is pointed toward the basin. Spray nozzle Caution Shower head bracket  Adjusting the volume of water the amount of hot water increases by pulling up the water stop handle.
  • Page 17  Adjusting the water temperature Turn the water stop handle to set the temperature to an appropriate level. Water stop handle Turning the water stop handle toward left (counterclockwise) will make the water hotter,and turning it toward right (clockwise) will make it colder. (C) Cold ...

  • Page 18: Guiding Customers

    The drain cap must be detached from the drain outlet when the product is not in use. If the drain is not detached, the drain may accidentally close, Caution and the water may overflow the basin from the Drain cap failure to notice water discharge, thus resulting in water leaks.
  • Page 19 Instruct the customer to sit on the seat from the side. Next, instruct them to face the front, and sit back in the seat. If customer does not sit back in the seat properly, their back may slide or they may not be able to be guided into the appropriate position. ...
  • Page 20 Shampoo the customer's hair Make sure that customers or other people do not touch the foot switch while shampooing. Warning Carelessly operating the switch may cause injury. Shampooing style <Back wash shampoo (seated position)> <Side wash shampoo > The user sits behind to the basin and shampoos The user stands next to the basin and shampoos from the rear.
  • Page 21 After use, wipe off any water on the product.  Water on the main body cover or the  Water dripping onto the floor via the shower hose outside surface of the basin After use, wipe water away from all parts other than the basin. Leaving the unit with water on it Caution may cause damage to the main body, and make dirt difficult to remove.

  • Page 22: Maintenance

    Maintenance Never use volatile chemicals such as thinners, alcohol, gasoline or kerosene, cleaning products such as wax with a scourer, a sponge with a scourer, detergents that include organic solvents, Caution acidic, alkaline or chlorine-based detergents, or scouring pads. Failure to follow this instruction may cause scratches or discoloration.
  • Page 23  Basin Wipe any dirt clean using detergent diluted with water. If streaked scratches appear due to contact with metallic objects such as watch bands, rub the area with a nylon scourer. Caution Do not use a metallic scourer or sandpaper, as this will damage the basin. Carefully clean around the neck cushion and head pillow attachment tools with an item such as a cotton-tipped swab.
  • Page 24  Shower head After the hot water becomes clear during the water flow test, always clean the shower head. Remove and clean any dirt trapped Failure to do so can result in insufficient flow rate within the shower head and faulty temperature regulation. Caution Take care not to damage or lose the O-rings and packing...

  • Page 25: Daily Inspections

    Daily Inspections  To ensure that this product can be used for a long period of time, follow the procedures outlined in "Procedures for Daily Inspections" on page 32 to 34 of this instruction. Always inspect this product following the procedures outlined in "Procedures for Daily Inspections". Continuing to use this product without performing the daily inspections may cause malfunctions or accidents.

  • Page 26: Consumable Supplies

    • Other (such as shower head, shower head bracket) Disposing of This Product When disposing of this product or replaced parts, adhere with current regulations and dispose of them appropriately. After-sales Service To request after-sales service, contact your closest dealer or Takara Belmont directly.

  • Page 27: Specifications

    Specifications Basin body [For Back wash] Type Seat body [Fixed Legrest] Type / [Movable Legrest] Type Part No. Seat [Fixed Legrest] Type / [Movable Legrest] Type Base plate Drive method Electronic and hydraulic External dimensions See "Dimensions" on P28, 29 Initial seat height height: 480 mm Vertical stroke...

  • Page 28: Dimensions

    Dimensions Overall layout diagram Basin body: Back wash type Seat body: Fixed legrest type Top view Hot water supply position Drain position Water supply position Side view 2950 (*2) or more 435 (*2) or more 1885 630 or more Wall Wall Lowest position Highest position...
  • Page 29 Overall layout diagram Basin body: Back wash type Seat body: Movable legrest type Top view Hot water supply position Drain position Water supply position Side view 2900 (*2) or more 450 (*2) or more 630 or more 1820 Wall Wall Lowest position Highest position Drain position...

  • Page 30: Procedures For Daily Inspections

    Procedures for Daily Inspections To ensure that this product can be used for a long period of time, conduct the inspections below.  Inspect the product every day Inspection item Inspection method If the inspection results show defects  Does the basin, ...
  • Page 31 Inspection item Inspection method If the inspection results show defects  Is there any oil  Check that there is no oil around  Oil may be leaking from the hydraulic cylinder. leaking? the bottom of the seat base cover. Stop using the product immediately.
  • Page 32 EU REPRESENTATIVE MANUFACTURER TAKARA COMPANY EUROPE GmbH Berner Strasse 18, 60437 TAKARA BELMONT CORPORATION Frankfurt am Main, Germany 2-1-1, Higashishinsaibashi, Chuo-ku, Osaka, 542-0083, Japan TEL: +49 69 506878 0 TEL:81-6-6212-3523 FAX: +49 69 506878 20...

Table of Contents