hatch comfort TAURAUS C1 User's Operating Manual page 53

Doc -030
10.1.4 Suction filter
CAUTION
Clean the suction filter at least once daily .
CAUTION
When cleaning the assembling filter cap, ensure that the rubber ring does not
come out and snap. The cap should be tightly contacted.
▶ Improper assembly may diminish the suction power and the suction line clog.
▶ After cleaning, apply Vaseline to rubber ring and ring slot for easier put in
1) Pull out the filter cap knob.
2) Take out the filter using a hook.
3) Clean the filter and filter cap with running water.
4) Assemble parts in the reverse order.
CAUTION
When taking out the filter, be careful to not drop particles into the filter tank.
Otherwise, lines may get clogged.
CAUTION
Please note that the filter can contain amalgam particles which include mercury
and must be lawfully disposed of in enclosed and structurally sound containers.
All containers holding dental amalgam waste shall include, at a minimum, the
label "dental amalgam waste for recycling" and the date the waste was initially
placed in the container until they are collected for shipment to a reclamation
facility or recycler. Avoid a direct contact when handling amalgam in the filter by
wearing utility gloves, masks and protective eyewear.
When flushing suction filter lines, avoid line cleaners that contain bleach or
chlorine, which may dissolve mercury from the amalgam particles and increase
the release of mercury into the dental wastewater.
Revised on 15/06/2021
and take out of the filter.
Hatch comfort C1 User manual
Filter cap
knob
Rubber
hook
filter