hatch comfort TAURAUS C1 User's Operating Manual page 47

Doc -030
8.13.2.2 How to adjust the table height
▶ With one hand, push down the top center of the dentist table. With the other hand,
turn the height adjustment knob counterclockwise.
▶ To raise the table, release the hand from the table. The table goes up and tighten the
knob clockwise at the height you want to fix.
▶ Lower the table, push down the table and tighten knob clockwise at the height you
want to fix.
▶ Alternatively, push both edges ('A') of the table with both hands to the height you
want to fix while knob is loosened. Tighten the knob clockwise while holding the top
center of the table.
▶ The adjustment range is 230mm.
CAUTION
If the knob is loosened without holding down the table, the table may jump up.
Loose the knob while holding down the table.
▶ Remove any instruments on the table when adjusting the table height.
Revised on 15/06/2021
A
A
Hatch comfort C1 User manual
tighten
Loosen