hatch comfort TAURAUS C1 User's Operating Manual page 39

Doc -030
8.10.3 Focus adjustment
CAUTION
The range of the adjustment cap movement is limited.
If the cap movement gets stiff, stop turning it.
If turned forcibly, it may be damaged and dismantled.
▶ The operating light is configured at the standard distance of 700mm from the
patient mouth. However, the cap can be adjusted quickly and easily between the
focus range of 600mm~1,000mm distance.
Illumination
Y
range
X
CAUTION
When the operating light is in use, all parts, except handle, may be hot.
cause burns if touched.
8.10.4 Adjustment of light intensity in 2 steps (standard)
▶ Press the
to turn on the operating light. Press it again to turn
off the operating light.
▶ Adjust the light intensity by turning a toggle switch
in the unit body.
▶ Adjust the direction of filament in lamp with 'Filament direction
adjustment knob' by loosening the knob a bit and turning it along with the guide
rail to rotate the lamp.
After controlling the direction of lamp, be sure to tighten the knob.
Depending on the degree of rotation, the illumination range and intensity change.
Revised on 15/06/2021
700mm
switch on the dentist control panel
Hatch comfort C1 User manual
Adjustment knob for filament
Adjustment cap
It may
Light intensity switch